All Aluminum Rolling Shutter Parts
This is ALU-WAY’s full catalogue of aluminum rolling shutter parts in Lebanon — 19 products, from manivelles (crank handles) and slat stoppers to gears with stop, axle and bearing plates, shutter locks and 10–100 Nm tubular motors. Most are made in our own factory and all are kept in stock; ask on WhatsApp for prices.
Showing 19 products
Aluminum Manivelle
مانيفيل ألومنيومCrank handle with folding grip for manual rolling shutters. Available in 1.5 m and 1.8 m lengths.
Manivelle Wall Clip
ملقط مانيفيلWall-mounted plastic clip that snaps the crank handle securely in place so it doesn’t hang loose.
Slat Stopper 5.5 — Hollow
سدّة ستور 5.5 تفريغHollow-backed stopper that mounts on the slat and keeps the curtain from rolling fully into the box. Made in Lebanon.
Cone Stopper
سدادة مخروطيةTapered cone stopper with washer and centre hole, for shutter tube ends and crank-rod outlets. Available in 5 colours.
Octagonal Tube Cap 60 mm
طبة أنبوب مثمن 60 ممEnd cap with pin for 60 mm octagonal shutter tubes.
Roller Shutter Gear with Stop — 1:10
مكنية ستور مع ستوب — 1/10Shutter gear with built-in stop that holds the curtain in position. Standard 1:10 reduction — about 10 crank turns per full rotation. Available with a 7 mm hexagonal or an 8 mm square bushing. Made in Lebanon.
Motor Endcap Gear with Stop — Fast 1:8
مكنية ستور مع ستوب — سريعة 1/8Faster-winding shutter gear endcap with built-in stop and a 1:8 reduction — about 8 crank turns per full rotation, quicker than the standard 1:10. Reinforced hex bushing. Made in Lebanon.
Slat Stopper 4.2 mm — Push-In
سدّة ستور 4.2mm شكPush-in slat stopper for 4.2 mm slats. Stops the curtain from rolling fully into the box.
Slat Stopper 5.5 mm — Push-In
سدّة ستور 5.5mm شكPush-in slat stopper for 5.5 mm slats. Stops the curtain from rolling fully into the box.
Slat Stopper 4 & 4.5 mm — Push-In
سدّة ستور 4mm و 4.5mm شكPush-in slat stopper, available for 4 mm and 4.5 mm slats. Stops the curtain from rolling fully into the box.
Slat Stopper 4 cm — Hollow
سدّة تفريغ 4cmHollow-backed slat stopper for 4 cm slats — open cavity underneath. Stops the curtain from rolling fully into the box.
Slat Stopper 4.5 cm — Hollow
سدّة تفريغ 4.5cmHollow-backed slat stopper for 4.5 cm slats — open cavity underneath. Stops the curtain from rolling fully into the box.
Shutter Lock Mechanism with Lever
زند قلّاب ذكرSteel locking mechanism with a lever arm and mounting plate that secures the rolling shutter in the closed position.
Shutter Mounting Plate
بلاك رولمانStamped steel mounting plate with slotted holes for fixing shutter axle and mechanism brackets.
Shutter Axle Support Plate
بلاك ذكرGalvanized support plate with a centre axle pin and multiple fixing holes, for mounting the rolling shutter tube end.
Shutter Axle Support Plate — Heavy Duty 15.5 cm
15.5cm بلاك ذكر ثابتReinforced galvanized support plate with a centre axle pin and a dense multi-hole pattern for heavy rolling-shutter tube mounting.
Shutter Lock Bar
ملقط حصيرةSteel locking bar with a hooked end that secures the rolling shutter’s bottom rail in the closed position; slotted hole accepts a locking pin or padlock. Available in two sizes.
Bearing Support Plate (Roulement)
حمليت رولمانD-shaped galvanized steel plate that houses the shutter axle bearing (roulement), with multiple screw points for secure fixing.
Tubular Motor
Tubular motors for rolling shutters, awnings, and blinds — available in different newton ratings, from small residential to industrial-grade.
Frequently Asked Questions
What are the parts of a rolling shutter called?
A rolling shutter is a slat curtain that rolls onto an octagonal tube (axle) held by bearing and support plates. A gear with stop — or a tubular motor — turns the tube, slat stoppers keep the curtain from rolling into the box, end caps close the tube, and a lock bar secures the bottom rail. A manivelle (crank handle) drives the gear by hand.
What aluminum rolling shutter parts does ALU-WAY sell?
Manivelles (1.5 m and 1.8 m crank handles) and wall clips; accessories — slat stoppers, cone stoppers, 60 mm octagonal tube caps, gears with stop (1:10 and fast 1:8), axle and bearing support plates, shutter locks and lock bars; and tubular motors from 10 to 100 Nm with remote controls.
How do I order parts and get prices?
Tap “Inquire” on any product to message ALU-WAY on WhatsApp (+961 3 745 558) with the product and quantity; the team replies with price and availability. Orders are supplied from stock across Lebanon and exported to Arab countries and Africa.